|
|
|
|
#1
|
|||
|
|||
Anyone know anything about the ford 4.2 v-6?
I just did a cam synch install and now I have no oil pressure. I have not verified it with a mechanical gauge but it taps as if the rockers are not oiling.
I did recheck and the oil pump drive shaft is inserted correctly but it seems a strange coincidence for the pump or sensor to go bad while working on something else. Anybody?
__________________
84' Wellcraft Fisherman 18 / 96' Evinrude 130-Sold 20' Fisherman project underway www.ParkerFenceandDeck.com 
|
|
#2
11-09-2012, 07:27 AM
|
||||
|
||||
|
does that motor use the distributor to run the oil pump? if so are you sure the distributor is seated all the way and into the oil pump.
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#3
11-09-2012, 10:01 AM
|
|||
|
|||
|
The cam synch runs the oil pump, similar to a distributor. I am positive it is seated all the way.
__________________
84' Wellcraft Fisherman 18 / 96' Evinrude 130-Sold 20' Fisherman project underway www.ParkerFenceandDeck.com
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
