Wellcraft V20 Community - Anyone know anything about the ford 4.2 v-6?

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)

- - Anyone know anything about the ford 4.2 v-6? (https://forums.wmpdevserver1.com/community/showthread.php?t=18402)

Curapa

11-08-2012 05:10 PM

Anyone know anything about the ford 4.2 v-6?

I just did a cam synch install and now I have no oil pressure. I have not verified it with a mechanical gauge but it taps as if the rockers are not oiling.

I did recheck and the oil pump drive shaft is inserted correctly but it seems a strange coincidence for the pump or sensor to go bad while working on something else.

Anybody?

Skools Out

11-09-2012 07:27 AM

does that motor use the distributor to run the oil pump? if so are you sure the distributor is seated all the way and into the oil pump.

Curapa

11-09-2012 10:01 AM

The cam synch runs the oil pump, similar to a distributor. I am positive it is seated all the way.

All times are GMT -5. The time now is 02:56 AM.