|
|
|
|
#1
|
|||
|
|||
First After Pictures
There wasn't a lot of room at the marina to take pictures, but here's a couple:
   The boat is going in the water on Wednesday. I'll take a lot more pictures once I get it in the water and pick it up. Hurray!!!
__________________
1984 248 Sportsman w/1999 5.7L EFI Mercruiser 2001 Carolina Skiff J16 w/2005 25hp Yamaha tiller control 
|
|
#3
05-22-2005, 09:13 PM
|
|||
|
|||
|
Re: First After Pictures
CT,
Looks good ! Hey - what are those stainless plates (roughly 2-3" sq) screwed into the floor in the back of the boat .... near your transom ? I have those in my '88 and I just figured they were put in by the owner and not a stock Wellcraft thing. I have no clue why they are there. Looking forward to your sea trial reports. I have just acquired my "re-power" (150 hp Evinrude Ficht, year 2001 w/ 30 hrs) and am very close to placing my order with Armstrong for a bracket. Cant wait to hear some performance reports from ya. Happy boating
__________________
'86 Cuddy (FICHT 150 on brkt) ------ 1988 V20 project in the garage
|
|
#5
05-22-2005, 11:34 PM
|
||||
|
||||
|
Re: First After Pictures
That looks Sweet! Good luck and keep us posted. Pretty soon us notched guys and I/O's will be out numbered. ;)
__________________
If your not living on the edge.....your taking up space.
|
|
#6
05-23-2005, 08:35 AM
|
||||
|
||||
|
Re: First After Pictures
Well CT...that answers all my questions...MAN that looks GREAT!!...thanks for the pics...hope good weather for sea-trial Wed...let us know how it go... ;D...
Looks like ya'll got so many boats up there you gotta stack 'em on the ROOF!... :o ;D...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#7
05-23-2005, 10:27 AM
|
|||
|
|||
|
Re: First After Pictures
Thanks guys.
Brian, fillet is spot on, they are mounts for a bench seat that goes across the transom. I still have it and it's in good shape, but I just use folding canvas chairs for extra seating when I need it. RAP, we have no room up here on the water! Probably the same number of boats as down there but no room for them. They've got trailers and boats on the roof at that marina! The four screws on the starboard side of the transom are where the pump is mounted for the washdown. They're putting the outlet on the starboard side just aft of the rod box.
__________________
1984 248 Sportsman w/1999 5.7L EFI Mercruiser 2001 Carolina Skiff J16 w/2005 25hp Yamaha tiller control
|
|
#8
05-24-2005, 01:00 AM
|
||||
|
||||
|
Re: First After Pictures
Brudda, you gonna have one SWEET ride come splash day... 8) ;D...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#9
05-24-2005, 08:19 PM
|
|||
|
|||
|
Re: First After Pictures
looks good CT...I'll bet youre anxious for that first turn of the key.Really wish this weather would break, I think we've been above 70 maybe 2/3X...I think Macojoe knows what we're talking about.
|
|
#10
05-27-2005, 11:01 AM
|
|||
|
|||
|
Re: First After Pictures
Brought the boat "home" yesterday in the gale warnings. Break in period is 10-hrs during which I can't exceed 4500 rpm and can't run at continuous rpm for more than 10-minutes. Even in a nasty chop, the boat exceeds (by feel, didn't have my GPS) previous top speed at just 3000 rpm. Highest I brought it to was 4000 and it felt great ;D! This is going to be a wonderful season. No throttle advance or even priming necessary to start the motor. Just turn the key and go! I took more pictures and will post them soon. One thing I did note is that the wheel pulls hard to starboard at higher rpm.
__________________
1984 248 Sportsman w/1999 5.7L EFI Mercruiser 2001 Carolina Skiff J16 w/2005 25hp Yamaha tiller control
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
