ALPHA 1 gimble teardown

[THEFERMANATOR]

Here is my latest OH SH!T for the day. The cable end for the shift cable that moves the shift shaft arm wasn't chamfered inside. You can see the one on the left isn't chamfered and the old one on the right is chamfered. This was enough to prevent the cable from moving the shift arm into the reverse position and would bind up the cable and would stall the engine because of the shift interrupt switch was being pulled all the way to one side. This is a true OH SH!T to find out after you have went through all the trouble of painting and putting everything together to have to pull it all back apart to put the old end back on and then reassemble.