Some pics of work on the Aquasport

[kamikaze]

Thought I would share some pictures of work I've been doing on my other boat. ( I know I still have to replace the fore deck of my V20 - all in good time). Needed to add a second fuel tank to increase the boats offshore range and also wanted to add an insulated fish box that would hold several tuns of decent size.

I started off building a mold that would end up being a hatch frame for the hole I cut in the deck to access the area where I wanted the fish box.



After several hours of glassing, grinding, sanding and Gelcoat you get something like this....





Then I whipped up a couple of hatches so even a good size tuna can jump right in.





And for the stress test. You can believe that if it can hold me without flexing, it has passed the test




Here's a picture of the tank that is still being worked. I'm going to do the cover in the similar fashion as the fish box, but the with only one hatch that will will be screwed and caulked to seal it.



Kamikaze