Re: Here's what I'm thinking
Macjoe: Console is where it should be, but tank is really to far aft. If you look at my rig on the trailer and see where the axles are. You would be surprised to know that it is very light in the nose with a full tank of gas! Tank has got to go forward, but moving the console up a bit is possible as well.
Airslot: CBBT and surrounding area for fishing and a 150 Johnson for power,
Willy: I was going to cut and grind the deck even with the liner. Smooth and fair as needed, and then paint. Suspect I'll have to strength the deck underneath, but that was part of the plan to make it self bailing with a drain channel around the outside edge of the hull. I wasn't assuming cutting and repairing the deck from the liner was going to be that big of a deal? Although I like your suggestion of interior support channels. They wouldn't get in the way much given the bow flair and amount the cap comes in up front. I could tuck them in out of the way.
Kamikaze
__________________
74 V20 CC with a 150 Johnson (Gone but not forgotten)
89 V20 Cutty with a Tower (Build in process)
|