Re: rod box inserts
Mulv, I can't compare it to anything else because this is the first time I did any sort of repair like that. The Evercoat is a 2 part material,the "filler" and the "hardener",I ended up using about 1/4 of the can, and then a smaller batch for the 2nd application. Just follow the directions, it was pretty simple. Be advised, you don't have too much time to work w/it. In fact the 1st batch may have had a bit too much hardener in it cause it set up pretty quick. As for sanding, it's pretty tough stuff, try not to lay to much on, then sand w/ 150 and then 220. Takes paint nicely. Seems like it would be good for filling screw holes,but, I am no expert in glass repair....still wouldn't hurt to ask around.Oh...about the pictures,I've got a new Dell here and a new digital camera,I can use both of them individually, more so the camera,I sorta stumble around w/ the computer...so I have no other excuse about no pics other than I'm an idiot...always have to rely on the TinMan to help me
|