[Zebra]

Well the foam didnt go all the way under but it was a bear with the hoist to get it out. Never used the leader wire couldnt get it low enough. The engine hoist was able to put enough preasure on the tank to break it free. Than had to keep trimin the edges to get it out the opening... For you guys that have done this job... Is the cavity that the tank sits in sealed or does it drain into the bilge area. There was alot of fuel in the cavity when i pulled the tank free. And i couldnt find a drain hole into the bilge so far. Put alot of water in the area to dilute the gas. Friday night and I got the tank out, tomorrow on a mission to find a tank... Good work tonight, thanks go to neighbors who lend a helping hand... Beer break with a shot...