Kracker:
To be honest, if your going to spend the money on a good paint spray it. It's that simple. If your going to rool and tip method try this. (Restrain your laughter until you reeasrch the web, but to be honest with a little more work it looks just as good as any other paint I've used to date.)
Look up Rusteolum Professional Enamel mixed with a enamel hardner they sell at Tractor supply. Lots of examples on the WEB. Roll it thin with a smooth foam roller and plan on light sanding of 320/400 grit in between coats. After three coats you won't be sorry. Takes it little bit longer due to the sanding in between coats but I have spent three times the overall cost per gallon on some other paints and wasn't any happer with the results I got using this method. Plus at 30.00 a gllon you can't beat the cost.
P.S. Mix a small can of the other colors avaialble to get the color you want. Experiment slowly adding the color to get the shade desired. And make sure you have enough to complete the job.
Kamikaze
__________________
74 V20 CC with a 150 Johnson (Gone but not forgotten)
89 V20 Cutty with a Tower (Build in process)
|