Ok guys, with the bias wire between the switch boxes disconnected (BTW this is a 16 amp flywheel) and plugs out, these are the new max readings to ground with the DVA:
blue=217v
blue/white=222v
red=53v
red/white=53v
Trigger check
wire read to / resistance / dva connected / dva disconnected
brown white 1248 / 5.26 / 5.20
white purple 1268 / 4.81 / 5.77
purple brown 0 / 1.52 / 4.56
According to Mercury CDI trouble shooting, since the readings are within specs when disconnected, the trigger is good and the pack(s) are bad.
What do you think?
|