Up date:
Well I got the batteries charged and put in a new ignition switch. Had to crank it a few times then it fired right up. I ran it for a few minutes then I check the compression. All six cyl test right at 90psi give or take a few.They all were so close I almost wonder if the guage is correct. I ran a can of sea foam through the motor with a fresh 1/2 gallon of mixed gas. It started raining so I did not get to check the psi again but will try later. At this point I'm going to assume the motor is just fine but I want to get it out with a load on it. Everthing seems to work the only issue was the steering was stiff but I have that working pretty good.
|