I installed a Taco Neptune T-Top on my Scout. I used the togglers for my T-Top as I had no access at all to the area it was to be bolted into. I used two per leg on the outside screws. The inside screws were able to go into the stringers.
Being that my deck is foam cored, I had to remove foam below the deck in order to allow the toggler to expand. I ended up drilling the correct size hole for the toggler to go through the deck, then to clear away the foam, I attached an Allen wrench into the chuck of my cordless drill. Poked the Allen wrench through the hole and gave it a spin. It shredded the foam real nice and the togglers worked perfectly. Feels pretty solid to me.
__________________
Heavily medicated for your protection.
|