Quote:
Originally Posted by stuarbc
So this weekend I removed the rotten hard top that was on my boat when I bought it...and replaced it with a canvas. The old top was bolted to the tower so I now have open holes all around the top......What should I use to fill the holes....I was thinking silicone.
|
If you want to do it nice and clean, post some pictures , I thoughts are grind the holes open a little, then use Marine Bondo (gel) not kitty hair and fill, then sand and paint or gel coat it , it will be good as new.
Here is an example of the stuff at work this hole was approx 2" wide
After
