OK, Riddle solved. The black wire going to bow light was broken inside the jackect. Now all I have to do is figure out the factory wiring (because I cut the looped black wire under the stern light) The switch is a 4 blade with power coming off the fuses above it. on /off/ on toggle. only two wires hooked up to it the fuse wire and a feed going to the stern light. If someone can draw a simple wire digram for Running lights I will just rewire the lights ( I would like running light (All), and anchcor light(Stern)
P.S. Bought new led bow light and stern light might as well do it right.
Thanks To All.
|