Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)

- - My V20 find (https://forums.wmpdevserver1.com/community/showthread.php?t=3421)

New to the board here. Nice message board. Real informative. I always wanted a Wellcraft V20.
I had been looking on Craigslist and Ebay for awhile. I just didn't feel like driving 500 miles to pick up a boat and have it be a total wreck.
I tried a local paper figuring there wouldn't be anything good in there and saw a '73 V20 with a '84 150hp Mercury on it. Sitting on a Shoreline glav. trailer. Said motor needed work. Drove 2 hours across the state to look at it. Didnt look bad, floors and stringers and transom where solid! Motor even started, but wouldn't rev over 1200 rpm and had gas running out of carbs. Guy said gimme a grand and tow it out of my yard. I grabbed it!
I got home and cleaned carbs out. Ran a few test with meter and found out the stator was bad. So far I am real pleased with my find. Thinking about building one seat box with tackle storage underneath and leave the one helm seat for the captain.
I noticed some of the newer boats have a place for the rod boxes, but my boat does'nt have that wall coming straight down from the inside edge of the gunwale. Hard to explain. In other words, I don't have a thick inside wall to cut out a opening to put in a rod box. I have the two saddle gas tanks there. I guess I have to mount some rod holders in there some how. Here are some crappy camera phone pics:

http://i124.photobucket.com/albums/p38/8barrel/v.jpg

http://i124.photobucket.com/albums/p...1120061555.jpg

Ah Man, A newbie who posts pictures. I like this guy already. ;D
Greetings to the site. Great bunch of V-20 lovers here.
Sounds like you got a great deal. Where ya from and where did you buy the boat at. We also have a gallery section, so take a bunch of pics. and post them in your Gallery. 8)

nice boat good luck with it.....

I am in Northeast CT. Found the boat down in Stamford, CT. Southwest corner of state. I got the motor running good and buffed out the hull with rubbing compound. Then I wrapped it up for the winter and backed halfway into carriage shed. Man I need a bigger shed!
I am going to start making a few things during the winter months. Like a new dash and gauges, seat box and maybe a bait box. A friend of mine has a fiberglass business and can shoot any box I make with his chopper gun. I know hand laid glass is better, but for a seat box I think the chopper gun is fine. Its really quick too.

Welcome to the board!!

I have a 75 V20 and is the same config as yours.

With one twist, it use to be a I/O and I converted to outboard via a bracket

Ck out my gallery for some ideas, but it sounds like you know what you want already!

I have the same gas tanks and I have another 25 gal tank were the motor use to be.

Check out everyones gallery's!! There is plenty of ideas and nice looking boats!

http://www.wellcraftv20.com/gallery/...umName=album09

Those chopper guns are cool to see in action. Seen a guy using one on some stuff he built.

Welcome to the site. Sounds like you made a great buy. You'll love the boat. The hulls are almost bullet proof.

8barrel...trust me when I tell you, phone pics are better than no pics...you done good!!...

Welcome to the board and keep us posted on your progress...while you and your buddy are shootin' up a seat-tackle-box, ya might wanna take orders...several of the other guys have been lookin' for those as well... :D ...

great find! congrats on the V20 and welcome to the board!

SEAT BOX, did I hear somebody say seat box?

We did find them on line, in New Zealand,
and some otheres for about $800+

There is another member that is working on boxes as well,
welcome to the board and let us know the progress of said
seat boxes, with pix and prices of the seat boxes.

Can you tell I may be one of the guys looking for SEAT BOXES??? ;D ;)

I had to use my cell phone to take pics because my daughter took my digital camera! Grrrr, that kid.

I'll take some pics of inside of boat today. When I get the seat boxes ready for the chopper gun, I'll take a bunch of pics. That chopper gun is cool. He sprays a coat of resin first, then a coat of chopped glass and resin. Lays it on pretty thick, then rolls it out out smooth with no air bubbles. The resin comes out of gun looking a reddish. Lets him know that its the right mixture of resin and hardener. Then as its curing it turns blue so that you know the hardener is kicking. When its done its back to clear.

Its funny tho, I can be there for ten minutes and when I leave I smell like that resin the rest of the day! Imagine what that crap must do to your brain cells!

it looks reel nice good luck with her she beutiful wont rev pass 1200 hmm check the fuel filters first let me know how it turns out

Lost the spark on the left bank. Stator tests bad. I got one coming in tomorrow. ;D

Sounds like you've got a handle on it, 8.

Nice V, welcome! And keep the pics a comin'!