v-21 WINDSHIELD SUPPORT BRACKET

[dmoore]

Would anyone here happen to have a pair of nice, not corroded windshield support brackets? I have found a source for the original black support rods themselves just need these brackets. Thanks! Dave

https://i.imgur.com/O87Ck3Vl.jpg

[Blue_Runner]

Dave if you find some let me know I need a pair also!

[dmoore]

I'm on it Blue! But it's proving to be a tuff one! Luckily Great Lakes Skipper had the original supports. They come with the chrome plated ends but not the pieces that screw DIRECTLY to the windshield with a black plastic gasket.

https://www.ebay.com/itm/404636089963

[steplift20]

Good luck on that
What I did I got Bimini hardware, the base,the tube end and a 7/8 or 1 inch tube and made my own out of stainless steel. To get a replacement arm is hard ,I could not find it long enough so I made my own and it works perfectly
The only thing to watch is when you screw the base in to the window frame be very carefull I used long screws and it cracked the window ( been replaced ) so use short screws and you will be fine
Make your own.

[dmoore]

Yeah Begreene did the same thing...cracked the glass...had to replace it..oppps