View Full Version : 2001 115 Yamaha…..
charlie_the_tuna
01-13-2022, 12:25 PM
Ok, change on the change on the change on the change. 1992 V20 with a 2001 115 Yamaha. It doesn’t look like a 4 stroke, but what do I know?!? How fast (or slow) will this motor push the boat? I think I might have a deal on this one. It seems a bit underpowered to me, but I’ve seen a few of them here with a 115 on the back. What kind of performance numbers can I expect out of this combination?
I need a quick answer. I’m about to crack open my piggy bank and cash out this weekend.
charlie_the_tuna
01-13-2022, 12:26 PM
https://www.boats.com/power-boats/1992-wellcraft-v20-steplift-7535186/
charlie_the_tuna
01-13-2022, 12:34 PM
Ok, obviously a two stroke. 2001. Talk to me, boys.
Blue_Runner
01-13-2022, 01:19 PM
Depends on what prop. Talk to the owner, he should be able to tell you numbers with current prop.
Propped for a decent hole shot, my guess on top end would be high 20's to 30. Sure you could get better top end with a different prop but the hole shot is going to suffer (and vice-versa).
Nobody wants to have to ask their whole crew to step to the front of the boat just to plane off.
charlie_the_tuna
01-13-2022, 01:25 PM
Unfortunately, the boat is on consignment and I won’t be dealing with the owner. Honestly, I figure if I can get a top end around 30th mph…. I’d be satisfied. Also, being it’s a newer hull, I would consider it a candidate for a repower down the road.
spareparts
01-13-2022, 05:41 PM
nice boat, solid motor(although small). If you can find what pitch prop is on it, you can figure out what speed it will run, or close to it. considering the market right now, and what comes with the boat, looks like a solid deal
phatdaddy
01-13-2022, 05:46 PM
Hull looks super clean, hard to tell for the pics provided. Was this boat kept in the water all it***8217;s life? Does the kicker come with it? How s the trailer look? Single axel or dual? Bunk or roller? Inspect bilge very close and take it for a ride.
That engine is on the slight side. But ok. Very reliable V 4. Easy to work on
I d check compression and lower unit oil
Not a bad price
charlie_the_tuna
01-13-2022, 09:22 PM
Yeah, pictures are sh!t! Going to see it Saturday morning. 7 minute drive from bass pro shop. Wait until you guys hear what I’m paying for it. I’ll keep you guys posted.
Pipe_Dream
01-14-2022, 03:11 PM
Yeah, pictures are sh!t! Going to see it Saturday morning. 7 minute drive from bass pro shop. Wait until you guys hear what I’m paying for it. I’ll keep you guys posted.
Good luck!
charlie_the_tuna
01-15-2022, 01:41 PM
Ok. Back from looking at the boat. Hard to give it a thorough once over as it’s shrink wrapped. From what I saw, the deck seems solid. Not rock solid, but way far from needing any attention. Transom was rock solid. For some reason, the kicker had growth. Not bad, but I’m wondering why anybody would leave the kicker in the water. Aluminum prop with a bit of a ding. Can absolutely be fixed. Couple layers of paint on the hull. Not a ton. My wife wants to dock it and I want to trailer. Yes, it would be easier and more convenient but I’m looking to prolong the life of this one. Even in the shrink wrap bubble, no fuel smell whatsoever. That’s gotta be good news. Missing one fish box insert. I fully expected that. All in all, a decent boat at a decent price. I don’t know why, but standing between the seats up front, it just seemed so small. Not at all like my last one. I’m not 100% if it comes with electronics or not. The guy said it comes with everything I see. I’m gonna mention the add shows a picture of a box of a plotter. I can’t really see anything that would make it a bad deal. Not the most beautiful trailer. Smaller bunk trailer, but looks like it’ll get the job done. We’re gonna run it this week and do a compression test on both motors. If it checks out, I don’t see a reason not to pull the trigger.
charlie_the_tuna
01-24-2022, 09:15 PM
Well, compression is 140 across the board and it runs like a sewing machine. Couldn’t figure out how to load the video. Kicker is at 180psi. I’m gonna run back up this weekend and stop in at bass pro and grab a little outfit I saw. The old girl should be in my driveway in about a week. I won’t know how to post pictures either, so I’ll just do my best to describe everything.
Giorgio
01-25-2022, 07:55 AM
Charlie, good luck. :beer: Here is how I post pictures, I load the pictures from where ever, camera phone to a folder on my PC, then while your posting or after your post scroll down to manage attachments, open it up, click on browse, it will open up your PC, find your folder, open that up and click on the picture you want. If it's more than one, repeat the process. For you video, again I save it to the folder than upload it on youtube, once it's completed loading, play it and then copy the URL and paste it into your report. It sounds long and difficult, it really isn't. I'm sure there are plenty of other maybe easier suggestions out there and everyone will try to help you out, but that's how I do it.
charlie_the_tuna
01-25-2022, 08:43 AM
Giorgio, I’m not the technical wizard you are. Also, I use an iPad. I can’t remember the last time I fired up my PC. I may figure it out one day. I may not.
Until then, I’ll remain blissfully ignorant.
phatdaddy
02-03-2022, 06:59 PM
Charlie here are the videos,
Kicker motor: https://streamable.com/ixlmqx
Main Motor: https://streamable.com/4nn93f
charlie_the_tuna
02-03-2022, 07:32 PM
Thanks Phat. No way I could have figured this out.
She will be in my driveway Saturday morning. I can***8217;t wait till the season opens.
Kicker is a 2016 4 stroke 15 hp.
Main is a 2001 2 stroke 115 hp.
I think it***8217;s gonna push us along just fine.
phatdaddy
02-03-2022, 08:38 PM
Don t thank me, had to get my son to do it. I use Imgur and they don t support videos.
Finally caught him after work today and he did it in about 2 minutes
Glad ur back in the V20 fold
Giorgio
02-04-2022, 06:30 AM
Charlie, it's getting closer and closer, sounds really good for you. ENJOY!!!!
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.