PDA

View Full Version : Gas tank vent


Stevebbc
07-01-2018, 05:23 PM
Never seen a screw in gas tank vent in the side of the hull near the fill hole like this 86 CC has. Always seen a screen vent with the screen facing down and towards the stern on other boats. Do you guys screw it down tight or leave it slightly open?

Destroyer
07-01-2018, 10:26 PM
Never seen one like that either. You sure you're looking at a gas tank vent and not a bilge discharge or something? :head:

phatdaddy
07-02-2018, 05:02 PM
Like destroyer, not sure what your describing. Sounds like someone stuck a barbed nipple on the vent hose and a cap on the outside . Take a picture or just go buy a correct one. Should be an easy swap

Stevebbc
07-07-2018, 04:07 PM
I screwed it all the way out and it has a screen in it that you can change out if it gets corroded I guess. Even screwed all the in, there is an air gap around the screw in part that will allow that tank to breathe. I thought it was shutting the air off when screwed all the way in but I just didn't take a close enough look. Never seen seen one like it.

Destroyer
07-08-2018, 09:16 AM
Okay. Never saw one like that till you showed us yours. :head: Did a little investigating. Here's what you have and who makes it.

https://express.google.com/u/0/product/7891111580678230343_18360811771021840650_8175035?u tm_source=google_shopping&utm_medium=tu_cu&utm_content=eid-lsjeuxoeqt,4181945&utm_campaign=8175035