PDA

View Full Version : Stuff for sale


Seacrets
10-21-2006, 05:26 PM
1. *Teak swim platform (bought from Ches 724 and I never used it) *See his gallery for a picture (laying on cockpit). *Comes with all hardware. *Starboard (right side) mounting excellent condition and made for a V20 *$35.00
2. *Whistler model PP500AC power inverter w/ cables and owners manual (never used) * $30.00
3. *Kicker bracket (used very good condition) *$35.00
4. *Rod boxes (too small for V20 openings) Top of one has some heat damage, however once installed you can't see it. * Need a 15" x 44 1/2" opening and with attached trim with pre drilled holes 16 5/8" x 46 1/2" overall. May work on an 18 Fisherman. *Very good condition * * $40.00
5. *Dock wheel (new never used) *Gets mounted on your dock and prevents boat damage *$15.00
6. *Misc. teak from V20 includes rod box trim, motor well (outboard), rod mounts for stock rod boxes, trim around port dash. * * * *$20.00
7. *2 bbl carb flame arrestor for a 4.3 I/O like new *$10.00
8. *Prop *19" pitch SS Mercury Vengence #4816516 *from a 150 hp Mercury. *Should work on a 150-200 hp *like new. *Make offer.
9. *Crusader 454 *eshaust manifold, riserand thermostat gaskets * $5.00

All prices do not include freight. *Sorry I got to have funds prior to shipment. *I got stuck for a fgt bill ($13.00) from a forum member. Never got the money, and I reminded him twice. *Oh well, live and learn. *

Seacrets
10-21-2006, 05:26 PM
1. *Teak swim platform (bought from Ches 724 and I never used it) *See his gallery for a picture (laying on cockpit). *Comes with all hardware. *Starboard (right side) mounting excellent condition and made for a V20 *$35.00
2. *Whistler model PP500AC power inverter w/ cables and owners manual (never used) * $30.00
3. *Kicker bracket (used very good condition) *$35.00
4. *Rod boxes (too small for V20 openings) Top of one has some heat damage, however once installed you can't see it. * Need a 15" x 44 1/2" opening and with attached trim with pre drilled holes 16 5/8" x 46 1/2" overall. May work on an 18 Fisherman. *Very good condition * * $40.00
5. *Dock wheel (new never used) *Gets mounted on your dock and prevents boat damage *$15.00
6. *Misc. teak from V20 includes rod box trim, motor well (outboard), rod mounts for stock rod boxes, trim around port dash. * * * *$20.00
7. *2 bbl carb flame arrestor for a 4.3 I/O like new *$10.00
8. *Prop *19" pitch SS Mercury Vengence #4816516 *from a 150 hp Mercury. *Should work on a 150-200 hp *like new. *Make offer.
9. *Crusader 454 *eshaust manifold, riserand thermostat gaskets * $5.00

All prices do not include freight. *Sorry I got to have funds prior to shipment. *I got stuck for a fgt bill ($13.00) from a forum member. Never got the money, and I reminded him twice. *Oh well, live and learn. *

Airslot
10-21-2006, 08:16 PM
Seacrets, thats a good idea about posting stuff. Sorry that I don't need anything right now, but thats just wrong about getting stiffed on the freight bill.

Airslot

Airslot
10-21-2006, 08:16 PM
Seacrets, thats a good idea about posting stuff. Sorry that I don't need anything right now, but thats just wrong about getting stiffed on the freight bill.

Airslot

reelapeelin
10-21-2006, 08:31 PM
Sorry I got to have funds prior to shipment. I got stuck for a fgt bill ($13.00) from a forum member. Never got the money, and I reminded him twice. Oh well, live and learn.


As long as that low-down-good-for-nothin-so & so wasn't me, we need a Hall of Shame
;) ;D ...

Sorry ya got burnt :-[ ...

reelapeelin
10-21-2006, 08:31 PM
Sorry I got to have funds prior to shipment. I got stuck for a fgt bill ($13.00) from a forum member. Never got the money, and I reminded him twice. Oh well, live and learn.


As long as that low-down-good-for-nothin-so & so wasn't me, we need a Hall of Shame
;) ;D ...

Sorry ya got burnt :-[ ...

Seacrets
10-21-2006, 08:49 PM
Thirteen dollars won't get me that new Porsche. Maybe I should've kept my trap shut.

Seacrets
10-21-2006, 08:49 PM
Thirteen dollars won't get me that new Porsche. Maybe I should've kept my trap shut.

macojoe
10-21-2006, 09:44 PM
Let us know!!

I will post him on the most wanted post!!

macojoe
10-21-2006, 09:44 PM
Let us know!!

I will post him on the most wanted post!!

Blu_Lunch
10-22-2006, 02:00 AM
Will the swim platform fit my 74 CC if so it's sold....Ted

Blu_Lunch
10-22-2006, 02:00 AM
Will the swim platform fit my 74 CC if so it's sold....Ted

macojoe
10-22-2006, 02:23 AM
It should fit any year!! ;)

macojoe
10-22-2006, 02:23 AM
It should fit any year!! ;)

msbhammer
10-22-2006, 11:50 AM
Offered to buy the platform, but ya never got back up with me. ( :'(

msbhammer
10-22-2006, 11:50 AM
Offered to buy the platform, but ya never got back up with me. ( :'(

Seacrets
10-22-2006, 12:08 PM
Hammer, you're right. I'll get a freight rate this week. Blu-Lunch, I'll also let you know the rate in the event Hammer doesn't want it. Is that fair? Sorry for the confusion.

Seacrets
10-22-2006, 12:08 PM
Hammer, you're right. I'll get a freight rate this week. Blu-Lunch, I'll also let you know the rate in the event Hammer doesn't want it. Is that fair? Sorry for the confusion.

tlb888
10-22-2006, 01:31 PM
Can I get a pic of the kicker bracket or a link of a new one. Thanks.

NCSTEPV

tlb888
10-22-2006, 01:31 PM
Can I get a pic of the kicker bracket or a link of a new one. Thanks.

NCSTEPV

Blu_Lunch
10-22-2006, 09:25 PM
I didn't see any offer for the platform posted here? By the post order I was the first.......It figures

Blu_Lunch
10-22-2006, 09:25 PM
I didn't see any offer for the platform posted here? By the post order I was the first.......It figures

Seacrets
10-22-2006, 09:58 PM
Hammer offered in May.

Seacrets
10-22-2006, 09:58 PM
Hammer offered in May.

msbhammer
10-22-2006, 11:30 PM
Hey BLU, the platform is all yours. I bought one off of E-Bay back in June. Good luck with it. Its a real nice looking platform. ;D

msbhammer
10-22-2006, 11:30 PM
Hey BLU, the platform is all yours. I bought one off of E-Bay back in June. Good luck with it. Its a real nice looking platform. ;D

Blu_Lunch
10-22-2006, 11:49 PM
Thanks ,Seacrets you should have my email adress in a PM let me know

Blu_Lunch
10-22-2006, 11:49 PM
Thanks ,Seacrets you should have my email adress in a PM let me know

Skools Out
10-23-2006, 12:09 AM
hammer i thought thatwas Sea's platform you were sporting :-/ hey can you send a pic of the teak you have?

Skools Out
10-23-2006, 12:09 AM
hammer i thought thatwas Sea's platform you were sporting :-/ hey can you send a pic of the teak you have?

Seacrets
10-23-2006, 12:30 AM
Skools, I'll get a shot tomorrow.
Thanks,
Bob

Seacrets
10-23-2006, 12:30 AM
Skools, I'll get a shot tomorrow.
Thanks,
Bob

C YENSEN
10-24-2006, 01:35 PM
HOW BOUT A PIC OF THOSE ROD BOXES? I THINK THEY'LL FIT MY 84'.

16X46 RIGHT?

C YENSEN
10-24-2006, 01:35 PM
HOW BOUT A PIC OF THOSE ROD BOXES? I THINK THEY'LL FIT MY 84'.

16X46 RIGHT?

Seacrets
10-24-2006, 05:52 PM
Cyensen,
The opening should be 15" x 44 1/2". Overall 16 5/8" x 46 1/2". My 85 and 86 openings were 48" long. Your boat may be different. I'm trying to download pics from the camera but I'm not too bright. They are like the ones in the for sale section, same physical size with three rod arrangement, not two. I'll keep working on the download.

Seacrets
10-24-2006, 05:52 PM
Cyensen,
The opening should be 15" x 44 1/2". Overall 16 5/8" x 46 1/2". My 85 and 86 openings were 48" long. Your boat may be different. I'm trying to download pics from the camera but I'm not too bright. They are like the ones in the for sale section, same physical size with three rod arrangement, not two. I'll keep working on the download.

Seacrets
10-26-2006, 01:37 PM
Sorry, after checking my boxes, they're two rods not three. Again, sorry.

Seacrets
10-26-2006, 01:37 PM
Sorry, after checking my boxes, they're two rods not three. Again, sorry.

C YENSEN
10-26-2006, 03:16 PM
DON'T MATTER IF 2 OR 3, I DONT USE THEM, JUST WANT TO IMPROVE COSMETIC LOOK OF BOAT.

C YENSEN
10-26-2006, 03:16 PM
DON'T MATTER IF 2 OR 3, I DONT USE THEM, JUST WANT TO IMPROVE COSMETIC LOOK OF BOAT.

Seacrets
10-26-2006, 03:49 PM
I got a shipping price from the Fast Mail place I use. To North Carolina it was less than $25.00 and it cost me $8.25 for the box and their fee to pack them. Let me know. You won't be disappointed, If you would like to give me your zip code, I'll check. Thanks for your interest.

Seacrets
10-26-2006, 03:49 PM
I got a shipping price from the Fast Mail place I use. To North Carolina it was less than $25.00 and it cost me $8.25 for the box and their fee to pack them. Let me know. You won't be disappointed, If you would like to give me your zip code, I'll check. Thanks for your interest.

C YENSEN
10-26-2006, 11:31 PM
can i see a pic? please?

C YENSEN
10-26-2006, 11:31 PM
can i see a pic? please?

Skools Out
10-27-2006, 12:18 AM
hey did you get those pics yet and where you located too? what ya asking for your rod box's again?

Skools Out
10-27-2006, 12:18 AM
hey did you get those pics yet and where you located too? what ya asking for your rod box's again?

Seacrets
10-27-2006, 12:31 AM
Sorry guys, all items sold. Had a friend stop by and took it all but the prop.

Seacrets
10-27-2006, 12:31 AM
Sorry guys, all items sold. Had a friend stop by and took it all but the prop.

C YENSEN
10-27-2006, 09:38 AM
what? what the hell is up with that? >:( :o :'(

C YENSEN
10-27-2006, 09:38 AM
what? what the hell is up with that? >:( :o :'(