Free Merc Parts

msbhammer · #1 04-22-2007, 09:13 PM

Heys guys, back from a few hundred mile drive. Picked up my tilt trim motor. Gonna use the tilt trim and the rams and res. But dont need the side and top engine mount.
Anybody who might need a set, let me know. I dont need them.

msbhammer · #2 04-22-2007, 09:15 PM

New "USED" Tilit Trim set up. Hopefully I wont have no problems.

msbhammer · #3 04-22-2007, 09:17 PM

AIR, you got a eye bolt I can borrow to support the engine ?
Gonna check and see if there is one on -Bay for cheap.

Airslot · #4 04-22-2007, 10:30 PM

Hammer, when I did mine, I wedged something, probably a piece of 2x4, under the tilt tube, I think. I'll take a look at mine tomorrow and try to refresh my memory. I have access to a lifting eye, but I don't know how long I could borrow it for? See if you can get all the attatching bolts loose. Maybe we can do it when I pick up the package?

msbhammer · #5 04-23-2007, 01:51 AM

Forgot about that AIR. Thanks.

phatdaddy · #6 04-23-2007, 09:51 AM

what year is that off of. i need a steering arm. it slides down the bracket on the right.

macojoe · #7 04-23-2007, 12:35 PM

Just make a harness out of good rope and hang from that, it will be good, no need for lifting eye!!
Also can put a small floor jack under skeg to keep weight off bracket.

Man you should see what I have lifted these motors with!! you run for the hills! I like living on the edge! Keeps my reflexs good ;)

macojoe · #8 04-23-2007, 12:35 PM

WOW Thats 7000 posts!!

msbhammer · #9 04-23-2007, 07:07 PM

Phats, the parts came of a 200 Merc. 1985 is the year.

Cleaned her up some more. Works well. ;)

Seacrets · #10 04-23-2007, 07:09 PM

Looks to be in good shape.