Va Beach v20 project - Page 46

Kracker Jack · #**451** 02-18-2013, 12:06 AM

And here's me with a princess hat on also. These are my 2 girls pictured. Time flys, I can't believe laila is 6 years old

Blue_Runner · #**452** 02-19-2013, 01:59 PM

"Papaw the sailor man....."

Kracker Jack · #**453** 02-19-2013, 06:16 PM

Quote:

Originally Posted by Blue_Runner

"Papaw the sailor man....."

Lol!!!! He's a trip!!! If you come up to fish with us you will meet him!!!!

Kracker Jack · #**454** 02-22-2013, 12:33 PM

Ripped down material on table saw

Predrill and counter sink screws,I'm screwing it on just to shape it,it will be removed and then glued and screwed back on

Here it is routered with 1/2 inch turn down

Kracker Jack · #**455** 02-24-2013, 12:28 PM

Doing some more dry fitting today. Set up the steering and binnacle. Fine tuned and routered starboard hatch cover. Just a little to damp for me to lay glass today.

Kracker Jack · #**456** 03-02-2013, 05:14 PM

So I decided that I've built everything else on this boat then why not build my own switch panel. Well here it is,made out of aluminum its gonna primed with aluminum primer and epoxy primed and then finish painted white. I also cut the hole out for my tach gauge

Here's how my console will be setup unless I make an electronics box for the t-top. I prefer to keep all electronics close to the power source for maintenance and wiring purposes.

Blue_Runner · #**457** 03-04-2013, 09:57 AM

Dayum....I love it. Keep on keepin on Matt....

Destroyer · #**458** 03-04-2013, 12:54 PM

Quote:

Originally Posted by Kracker Jack

I prefer to keep all electronics close to the power source for maintenance and wiring purposes.

Smart move. Speaking from experience, I can tell you that snaking wires thru the pipe to the T top is a real pain, especially if you do it a few at a time as you add electronics. Your panel looks awesome. Nice job Kracker.

reelapeelin · #**459** 03-05-2013, 03:14 AM

Quote:

Originally Posted by Kracker Jack

So I decided that I've built everything else on this boat then why not build my own switch panel. Well here it is,made out of aluminum its gonna primed with aluminum primer and epoxy primed and then finish painted white. I also cut the hole out for my tach gauge

Here's how my console will be setup unless I make an electronics box for the t-top. I prefer to keep all electronics close to the power source for maintenance and wiring purposes.

Normally I lean toward flush mounting electronics...but I REALLY LIKE the way that sets up!!...and yer switch panel's ROCKIN'...

Kracker Jack · #**460** 03-05-2013, 06:53 AM

Thanks everyone for the kind words. I told myself in the beggining this boat was gonna based off simplicity and function with minimal creature comforts. I bought all 6 of my switches on eBay for 8 dollars delivered to my door.