|
|
|
|
#1
|
||||
|
||||
Re: 21 FT Project Boat Update
DA sanded with 40 grit paper, then rolled with epoxy 2 part primer all over, then palm sanded smooth with 80 grit and then sprayed with toplac Brighter Bright white. Next going tosand with palm and 220 grit and put a final coat on the ol girl.
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's 
|
|
#2
07-31-2006, 01:30 AM
|
||||
|
||||
|
Re: 21 FT Project Boat Update
Spent the day wiring the whole boat and tested all wiring, drilled and counter sunk all the holes, mounted all the cleats, lights, and bilge pumps. then took them off and coated all the holes with epoxy so no fear of rot later and now is ready for a final sanding and the coat of paint.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#3
08-01-2006, 02:01 AM
|
||||
|
||||
|
Re: 21 FT Project Boat Update
some wired pics
Pic of location of a deck lamp to light the floors   AnchorLight location  Bilge pump and float switch wired  Under dash where fuse panel and wiring will end up once complete 
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#4
08-14-2006, 01:14 AM
|
||||
|
||||
|
Re: 21 FT Project Boat Update
finally worked on the boat today. UGH been a long week the Tahoe's Diesel died last Sunday night coming home from the coast so spent the week fixing it and getting all the crap back under the hood an over $400 later it's running on all 8 cylinders again. Then the d@mn John Deere transmission broke spent yesterday working on it ugh.
So I hated how this boat's dash was flat and the gauges couldn't been seen without standing up so i built a dash and installed a set of pop up cleats. PS they are a pain in the a$$ to install, glad i fit it before the final coat of paint. Filled the old gauge holes in the dash here's pics            
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#5
08-14-2006, 01:26 PM
|
||||
|
||||
|
Re: 21 FT Project Boat Update
Pretty crafty on the guage modification! She's coming along!
__________________
 1994 Wellcraft V21
|
|
#6
08-15-2006, 01:35 AM
|
||||
|
||||
|
Re: 21 FT Project Boat Update
here's more from tonight BR got the dash finished and ready for a coat or primer tomorrow.
Before      After             Here's a door made to fit the hole seen in PIC got to coat with glass both sides and then prime. 
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#7
08-15-2006, 10:40 AM
|
||||
|
||||
|
Re: 21 FT Project Boat Update
Yo Skools!!...great work, Man ;) ...no doubt I envy your fiberglass talents...you got it goin' ON!! ;D ;D...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#8
08-15-2006, 05:22 PM
|
||||
|
||||
|
Re: 21 FT Project Boat Update
Thanks There, Come on over we'll have some glass fun in the shop lol
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#9
08-16-2006, 02:07 AM
|
||||
|
||||
|
Re: 21 FT Project Boat Update
Here's the new dash primed with a brushed coat of epoxy primer. What ya think?
            
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
 |
|
|
Hybrid Mode
