How come no new " how fast " threads ?

[bradford]

Originally Posted by Blue_Runner

I think we need a "How slow...." thread. For instance, when I was using my 9.9hp I was able to put along at .9 mph. I'm thinking with a Sears Eska 1.2 hp air-cooled 2-stroke outboard (tuned just right) I could get to .3 mph but concerned about how the V will handle the lack of speed. Can these hulls handle it? Do you think any water that hits the deck will drain forward as opposed to aft toward the scuppers or do I need to add some ballast in the rear???

Am I over-thinking again? HELP!

You probably want to go with a Sears Gamefisher instead of that Eska. That or quadruple Force 125's ('87 model, The black ones with the digital watch graphics) on a bracket with custom ventelating steps built into the hull.

[reh76]

Originally Posted by bradford

You probably want to go with a Sears Gamefisher instead of that Eska. That or quadruple Force 125's ('87 model, The black ones with the digital watch graphics) on a bracket with custom ventelating steps built into the hull.

For an offshore fishing rig how would that compare to say a 1985 Bayliner Capri with counter rotating Force 90's and vent holes drilled in the props?

[Genie Aye]

Originally Posted by bgreene

How about the new Yami 300 4 stroker ? Supposed to be much lighter........

Figure fully trimmed it should push a V21 about 58 mph.

Why screw around with the little stuff----Put the 525hp outboard on it and call it good---should do around 80+ if the hull does not come apart---LMAO

You are right--the horse is dead

[RidgeRunner]

For the record, those Force engines were not black. I believe the color was Force-ler Blue. Late 80's I worked at a place that sold VIP's with factory rigged Force outboards. Never saw a counter rotating Force, nor a 25" shaft come to think of it. Wonder if any are still alive?

Long live the go-fast thrreads.

[Blue_Runner]

Seriously guys....I expected more out of you. At least Bradford did touch on the question at hand. Otherwise, most of my questions have not been answered.....disapointed......think I will post up on THT where the real expert "GO SLOW" pros hang out.

Cheers.

[jasoncooperpcola]

At what rpm do you get .9 mph with a 9.9?

[Blue_Runner]

Honestly do not know because there's no tac but I believe it is a 9 p prop and .9 was a tick above idle so my old workhorse would stay runnin.

Anybody getting .1 or less?