Broken bolt

Ambush · #1 06-15-2012, 11:38 AM

PLEASE (I don't have a manual)need the torx spesc for the exh manifold, see picture.

Got the broken bolt taken care of and new gaskets so just need the torx spec...

Thanks...

spareparts · #2 06-15-2012, 09:05 PM

don't know the exact spec, but usually 3/8 bolts torque to around 30 ft lbs, with that long of a bolts I estimate not quite farmer tight, but not as loose as city boy loose

twhrider2 · #3 06-15-2012, 09:41 PM

Spare is right on ...specs give 25 ft lbs. Just did mine.
By the way a Hello to ya as we are practically neighbors, I'm in Asheboro. And good luck.

cfelton · #4 06-16-2012, 05:47 PM

Good job on that bolt! Ive been removing bolts like that for many years. Some can be really tuff. Take my advice and apply a good coat of anti-sieze before installing those bolts back in. Felpro copper based antisieze works really well!

Ambush · #5 06-16-2012, 10:22 PM

Yeah its all back together looking good. Thanks for the spec on the torx guys...

Going out on tuesday for maiden voyage...