|
|
#11
03-31-2008, 06:09 PM
|
||||
|
||||
the 78 will fit but you will have to swap the shift rods as the older one was off a cross flow and newer motor a looper they just use a different shaped shift rod that's all. they just screw in and out.
Now on a 20" lower unit the shift rod when you swap should measure 21 & 15/16 inches measuring from the surface where the gear case and midsection meet to the top of the shift rod when the gear case is in neutral.
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's Last edited by Skools Out; 03-31-2008 at 06:21 PM. 
|
|
|
Threaded Mode