![]() |
|
|
|
#1
|
|||
|
|||
|
Hi everybody,
I'm new to WellcraftV20.com but not to the V20. I've had a 1983 V20 since 1985. Repowered in 2000 with a Yamaha 175. I've always kept the boat on a dry rack until a year and a half ago (it's now in the water). Now I'm ready to kep the boat on a trailer. Question 1: Recommendations on an exact model of trailer. Question 2: Cheapest place to buy one. I live in Savannah, Georgia. The boat will be mostly stored on the trailer at a local marina. No long hauls. I really appreciate any guidance. Chuck |
|
#2
|
||||
|
||||
|
Hey rock welcome, listen I don't know any particular model #s but will suggest a couple of things, galvanized steel DUAL AXLE trailer from any of the major manufactures in you neck of the Piney Woods
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#3
|
||||
|
||||
|
go with Aluminum Tandum.
cheapest place http://www.boattrailers.org/ same guy http://www.fishingworld.com/vDealers...r/Default.tmpl
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#4
|
||||
|
||||
|
Hey Lord Skools why aluminum, the galvanized up here seem to hold up longer, lot of cracked welds and broken cast aluminum parts on them trailers I hear guys complain all the time ???
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#5
|
|||
|
|||
|
make sure you also get a spare tire.
|
|
#6
|
||||
|
||||
|
lighter towing and gives better fuel mileage. plus you'll never see Aluminum Rust lol.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#7
|
||||
|
||||
|
Due to flotation in tires, alum's light weight, saltwater bouyancy and currents, an alum trailer will DRIFT in certain conditions... ;)...
rockin'...welcome to da board... :D...V20 since 1985?...we welcome the knowledge and experience you've picked up over 20 years...post some pics of your boat...matters not what shape she's in...we just wanna see... a bunch of curious old pharts that way... ;)... I normally recommend tandem axels and brakes, but if your routine over 20 yrs of boating allows only a short haul from storge location to ramp, you can get by w/single axel and no brakes...wish I were that lucky... ;D...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#8
|
||||
|
||||
|
well i only trailer mine a distance of 4 miles from the house to the ramp and i have a 1991 Venture Single Axle. Does Fine, but it you will be trailering all the time and putting her in and out of the water all the time, I suggest full rollers. ;)
__________________
|
|
#9
|
|||
|
|||
|
I really appreciate all the help. Yep, my Dad and I bought the V20 back in 1985. Have always loved it. Nothing like the feeling of that deep V plowing into a swell and seeing the water part like the Red Sea.
|
|
#10
|
||||
|
||||
|
Hey Rebel, I can tell you that I got a much better deal on a used one than new, but I had to drive to St. Pete to pick it up. Of course, that was like 10 years ago . . . ::)
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|