Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General

Reply
 
Thread Tools Display Modes
  #1  
Unread 03-08-2019, 08:24 PM
077tango 077tango is offline
Junior Member
 
Join Date: Oct 2018
Posts: 8
Default possible 1978 project for $50

Found this today, sparked my interest.Appreciate your comments and I do have a couple questions:

if trailer is usable looks too short can trailers be lengthened? Looks to me 3-4 feet is needed
Transom looks very shallow, is this the normal depth.
Here's the description.

WELLCRAFT 1978 STEPLIFT V-20, HULL ONLY, PROJECT.

I CAN'T FIND TIME TO FINISH THIS PROJECT, SO MAYBE YOU CAN.

ONE OF THE BEST HULL DESIGNS EVER (AS FAR AS A DRY RIDE IS CONCERNED).

HULL IS IN VERY GOOD CONDITION. ALL WOOD HAS BEEN REMOVED FROM TRANSOM AND IT NOW NEEDS TO HAVE THE TRANSOM CAVITY FILLED WITH A POURABLE CERAMIC COMPOSITE TO MAKE IT INDESTRUCTIBLE FOREVER (OR AT LEAST FOR A VERY LONG TIME).

CUDDY CABIN.

GOOD WINDSHIELD GLASS.

TRAILER INCLUDED, BUT YOU'LL NEED TO SUPPLY WHEELS AND TIRES.


Thanks for your input.
Attached Images
File Type: jpg wellcraft 1.jpg (617 Bytes, 71 views)
File Type: jpg wellcraft 2.jpg (1.2 KB, 75 views)
File Type: jpg wellcraft 3.jpg (1.0 KB, 71 views)
Reply With Quote
  #2  
Unread 03-08-2019, 08:47 PM
077tango 077tango is offline
Junior Member
 
Join Date: Oct 2018
Posts: 8
Default project boat

How do I get my pictures bigger?
Reply With Quote
  #3  
Unread 03-09-2019, 10:45 PM
3 Squids's Avatar
3 Squids 3 Squids is offline
Senior Member
 
Join Date: Apr 2016
Location: Cobbs Creek Va.
Posts: 485
Default

Can’t see the pics too well. As for how to fix that, I can’t tell you. Since the photobucket scheme I haven’t figured out how to put pics on her me.

Anyways as for the boat, once again I can’t see the pics to give an accurate opinion about the trailer. The transom is set up for a 20” shaft motor which for lakes and inland stuff I think will suffice but being that the transom is already gutted you might as well build it up to a 25” or even close it off and invest in a bracket.
__________________
Current boat(s):

1985 V-20 Cuddy/ 470 IB/OB
1972 Egg Harbor 38’ Sedan/ 454 Crusaders
Reply With Quote
  #4  
Unread 03-10-2019, 11:49 AM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

Imgur for posting photos

You have some adjustment on most trailers with the tongue , winch post or axle location.

But the trailer could still be too short, worst part of any deal is usually the trailer
Reply With Quote
  #5  
Unread 03-10-2019, 01:56 PM
SkunkBoat's Avatar
SkunkBoat SkunkBoat is offline
God
 
Join Date: Mar 2010
Location: Manasquan Inlet, NJ
Posts: 1,913
Send a message via ICQ to SkunkBoat
Default

There is a post in "How To" for How to post pix with imgur

http://wellcraftv20.com/community/sh...ad.php?t=22480

Looks like you copied and pasted thumbnails, not the full image.

78s didn't have overboard draining decks.
Probably has a 20" transom, saddle tanks.
I would raise it up to 25".

I did a pourable transom. Look for thread here tagged transom and look at my you tube videos https://www.youtube.com/watch?v=EEz94NbKCh0&t=2s and https://www.youtube.com/watch?v=Oe_ZmPOUCNc

Trailers are almost always cheaper to buy new than replace 2 axles, springs, brakes, hubs, actuator, lights, wiring, rollers and u bolts....oh and 4 TIRES.

That said, You gotta make the call based on condition. From what I can see its a double axle, probably long enough unless someone cut the tongue.
__________________
1984 V20 "Express" & 2003 Suzuki DF140 (SOLD!)
2000 GradyWhite 265 Express

YouTube/SkunkBoat https://www.youtube.com/channel/UC4F...znGospVOD6EJuw

Transom Rebuild https://www.youtube.com/watch?v=EEz94NbKCh0
https://www.youtube.com/watch?v=Oe_ZmPOUCNc

Last edited by SkunkBoat; 03-10-2019 at 02:11 PM.
Reply With Quote
  #6  
Unread 03-11-2019, 09:43 AM
077tango 077tango is offline
Junior Member
 
Join Date: Oct 2018
Posts: 8
Default

thanks for the comments, I'll try to repost the pictures.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:34 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.