|
|
|
|
#1
10-23-2012, 10:48 AM
|
|||
|
|||
Ideas for fish box and lids in floor
I bought a 1979 Wellcraft V20 not that long ago and it didnt have any doors over the fish boxes in the floor so I made some out of some wood I had laying around. thay didnt hold up for to long. i have to make new ones for it. What should I use where to buy it and hardware to use. The fish boxes in the floor fill out with water and the only way to get the water out is to bail to out. I would like to have it so I can fill them up and drain them with not that much hassle. Any info and pics would be a big help. Thanks
|
|
#2
10-23-2012, 12:42 PM
|
||||
|
||||
|
Use a 3/4 inch KING Starboard . It is some pretty good solid stuff. It also can be cut and molded/ sanders and routered Like wood. A little pricey but worth it.
|
|
#3
10-23-2012, 02:37 PM
|
||||
|
||||
|
Quote:
Welcome to the site! The fishboxes in the 1975 model just drains into the inner bottom and to the bilge. Don't know if it would be doable on a 1979 or not.
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny
|
|
#4
10-23-2012, 03:05 PM
|
||||
|
||||
|
Yea welcome to the site.
As far as purchasing starboard you can try looking for a local Industrial plastics distributor. The one near me carries starboard in all thicknesses. Thats where I get mine when I need it and the prices are much better than getting from a marine place. As far as your fish boxes go do they have drains that are not draining or are they solid on the bottom?
__________________
1986 V-20 1986 Yamaha 150 HP
|
|
#5
10-23-2012, 03:20 PM
|
||||
|
||||
|
EBay also has starboard for sale in diferrent sizes. Make sure you do your search clarifying 3/4 thickness and color.
|
|
#6
10-23-2012, 05:32 PM
|
||||
|
||||
|
Also, keep in mind that fish boxes are intended for fish and ice, not water.
|
|
#7
10-23-2012, 05:48 PM
|
||||
|
||||
|
3/4 Starboard is the way to go!! Here we have a place that also sells Seaboard, for restaurants and stuff, its the same stuff but cheaper!
I did my whole boat with the stuff walls, floor covers, and the forward bulkheads under the windshield. Another way is to go to your local DIY store, Lowes, Home Depot, ect. and get that new plastic decking lumber, and make the covers, another member here did that and they looked great! Here is some pic's from my boat The possibilities are endless! Cuddy tracks  Gas tank covers and transom cover  Bulk heads  Tank covers  Built in tackle box 
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#9
10-25-2012, 04:57 AM
|
||||
|
||||
|
Steve, I agree w/all here who recommend starboard or seaboard...a couple of tips for ya...WHITE only...I used light grey on my '74 and in the hot summer, you cannot stand on it barefooted...and this high density plastic EXPANDS in the summer when warm to hot...so leave some margin around the sides to compensate or you won't be able to open 'em up in summer...
It cuts easily w/a skill saw, chopsaw, jig saw and all, but doesn't leave a smooth edge w/a saw blade...if you're looking for a good finished edge, a router will do nicely...and no matter how you cut, have the shop vac handy!!...this stuff makes LOTS of shavings!!... Good luck w/it and post us up some pics as you go...we like 'um pictures... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
