|  | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Shaft length on 18 Fisherman 
			
			I am looking at a 1982 Wellcraft 18 Fisherman. No motor no trailer. What size shaft motor do i need for this? Also are these pretty decent boats?
		 
				__________________ 1983 V-20 capsized. . . . in the garage. | 
| 
			 
			#2  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			All of the 18 Fishermans that I know of come with a 20" transom. Imagine a V-20 but 2' shorter, built like a tank. Heavy for an 18' boat, does well in rough water for its size.
		 
				__________________ 84' Wellcraft Fisherman 18 / 96' Evinrude 130-Sold 20' Fisherman project underway www.ParkerFenceandDeck.com | 
| 
			 
			#3  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			How does yours run with a 130? Are they good on gas?
		 
				__________________ 1983 V-20 capsized. . . . in the garage. | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			With the new t-top I hit 38mph the other day, but neither wind nor current were in my favor. Before the t-top I maxed out at 42mph. Ideally, I would want a 150, which is their maximum HP rating.  I have never actually measured the MPG so I can't give you an accurate answer about my fuel economy. 
				__________________ 84' Wellcraft Fisherman 18 / 96' Evinrude 130-Sold 20' Fisherman project underway www.ParkerFenceandDeck.com | 
| 
			 
			#5  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Not bad!! Also what size is the tank?
		 
				__________________ 1983 V-20 capsized. . . . in the garage. | 
| 
			 
			#6  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   Quote: 
 Keep us posted!!...sounds like this could be an interesting project...pics if ya can!! Put a tape on that transom...only way to be sure...original owner could have ordered anything and previous owner could have DONE anything... Generally a 150 is gonna be a heavier V-6, whereas a 140 will be a much lighter 4 cylinder...usually I like maxing one out w/HP, but this ones right on the pivot point for me...I'd have to look closely at a 140 for an 18...just my 2 cents worth... 
				__________________ '74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha | 
| 
			 
			#7  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			20" on my 90' also. They are great boats..very heavy for their size so they handle the water as good or better than most 20' "newer & lighter" bay boats Ive been in.  I only get about 3mpg but thats due to the old thirsty 120hp Force. Mine will run 38 lightly loaded. Lord willing I plan on never parting with her.     
				__________________ Really, who ISNT better looking than Charlie? | 
| 
			 
			#8  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			AJason, Stinky's got a great example of a V18 here!!...and down in his neck-of-the-woods it's been well tested...if he's gettin' 38 outta his 120, a 140 oughtta get ya 40... Ain't gonna steal Jason's thread, but Stink you sure have rigged your 18 out nicely!!...lovin' that lean post, bait tank combo...NICE WORK!!...   
				__________________ '74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha | 
| 
			 
			#9  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			Thanks! I just had to show her off a little...i dont get the chance often with all these "big" boats around here.    Ok last one, Ill stop! LOL 
				__________________ Really, who ISNT better looking than Charlie? | 
| 
			 
			#10  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   Quote: 
  Purdy work, Stinker...REEL Purdy!!...  That looks like a dash I would set up...only two gauges; tach & fuel!!...  ...likin' that Starboard work...   
				__________________ '74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |