![]() |
|
|
|
#1
|
|||
|
|||
|
I ve been out a couple days this week fluke fishing I noticed that at the end of each drift when the engine is still warm I'm having trouble starting it again, I've actually had to advance the throttle/shifter to get her started then quickly put her in gear and goose it till I get moving. It starts and runs perfectly when cold, it runs perfectly when under way and at WOT it's just on warm starts.. I cleaned the o2 sencor at the beginning of this season and found it to be spotless, yesterday I pulled the water separator and emptied the contents into a glass to find no water or debris but still changed it anyway , I changed out the gas filter but it also seemed pretty clean. Still the same problem .I guess my next step is going to be the vst filter or should I be looking elsewhere ?
__________________
1988 Grady White Seafarer Yamaha 250 ox66 on a bracket |
|
#2
|
||||
|
||||
|
Try re-priming ball before warm starts. Probably won't make any difference, but i try to look at easy first
|
|
#3
|
||||
|
||||
|
rebuild or replace the mechanical fuel pumps, you probably have a diaphragm leaking on one
|
|
#4
|
|||
|
|||
|
Thanks guys, I'll give the primer ball a try, but as per spare's recommendation I will change the fuel pumps
__________________
1988 Grady White Seafarer Yamaha 250 ox66 on a bracket |
|
#5
|
|||
|
|||
|
Where were you fluking? I saw a steplift around keyport nj on Sunday with a Yamaha motor
__________________
love to fish |
|
#6
|
|||
|
|||
|
Step, unfortunately I no longer have a v20, I had to go a bit bigger in size. But keep that between us cause I'm afraid if the guys find out they mite not let me hang around here anymore
__________________
1988 Grady White Seafarer Yamaha 250 ox66 on a bracket |
![]() |
| Thread Tools | |
| Display Modes | |
|
|