Lure storage

[Franco]

That lifts right out of the boat brudda!

[willy]

Yea fishing is definetly on the back burner under those circumstances Hammer ;)

[phatdaddy]

Ahhh PVC & milk crates, building blocks of the universe. Franco, you can also lay a bead of PVC glue down the outside edge and bond another to it. After you get two to bond the lay a third one where you have two edges to bond on & so on. Put on as many tubes as you want & it will be freestanding. Ive also mixed different lengths to accommodate different length plugs. when you get back from fishing just hose off and air dry.

[Franco]

Thanks for the good ideas Brudda Phat!

[chumbucket]

I have a very similar setup in my kayak Franco. I also made a lid for mine by cutting the bottom of a second crate on a table saw (you know, the bottom of another that allows them to stack on top of each other). I then drilled three holes and used plastic wire ties to make a hinge on one side. A small bungie to hold down and you're good to go. Quick washdown of all the plugs like others mentioned. ;) Nice, quick, easy. Less is more. 8)

[reelapeelin]

I like it, Pubah!!... 8) ...

[Blue_Runner]

Me too! 8)

[C YENSEN]

Originally Posted by Franco

It has a hinge that slips into a bracket and is held in the bracket with a pin

i just bought this same board, it is awesome ;D