|
|
#1
|
||||
|
||||
Replacing the drain plug
Last season I noticed that the drain plug was rotating slightly in transom as I tightened or loosened the drain plug. Today I pulled the old plug out and was pleased to find that everything appears to be solid and dry. I'm going to install a new drain plug and was looking for a recommendation on what to use to seal the plug to the hull. (Here's the required pictures for Hammer)
 
__________________
Formerly - 89 cuddy 165hp I/O and 95 V21 / 150 Honda When the people fear their government, there is tyranny; when the government fears the people, there is liberty. - Thomas Jefferson 
|
|
#2
04-02-2007, 11:29 PM
|
||||
|
||||
|
Replacing the drain plug
Last season I noticed that the drain plug was rotating slightly in transom as I tightened or loosened the drain plug. Today I pulled the old plug out and was pleased to find that everything appears to be solid and dry. I'm going to install a new drain plug and was looking for a recommendation on what to use to seal the plug to the hull. (Here's the required pictures for Hammer)
__________________
Formerly - 89 cuddy 165hp I/O and 95 V21 / 150 Honda When the people fear their government, there is tyranny; when the government fears the people, there is liberty. - Thomas Jefferson
|
|
#3
04-02-2007, 11:37 PM
|
|||
|
|||
|
Re: Replacing the drain plug
Rick,
Personally, I would use 5200 or Boat Life. Would put these sealers on the screw threads as well as around the plug.
|
|
#4
04-02-2007, 11:37 PM
|
|||
|
|||
|
Re: Replacing the drain plug
Rick,
Personally, I would use 5200 or Boat Life. Would put these sealers on the screw threads as well as around the plug.
|
|
#5
04-02-2007, 11:51 PM
|
||||
|
||||
|
Re: Replacing the drain plug
Definately use an adhesive type of sealer. 4200 or equivelant wouldn't provide the hold you need. You don't want that sucker coming off.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
|
#6
04-02-2007, 11:51 PM
|
||||
|
||||
|
Re: Replacing the drain plug
Definately use an adhesive type of sealer. 4200 or equivelant wouldn't provide the hold you need. You don't want that sucker coming off.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664
|
|
#7
04-03-2007, 12:00 AM
|
||||
|
||||
|
Re: Replacing the drain plug
rotate the clock position so your screwing in fresh wood/glass, use 5200 and poke some in the old screw holes before you start
|
|
#8
04-03-2007, 12:00 AM
|
||||
|
||||
|
Re: Replacing the drain plug
rotate the clock position so your screwing in fresh wood/glass, use 5200 and poke some in the old screw holes before you start
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
