![]() |
|
#1
|
||||
|
||||
|
Our local weather forcaster says NE is in for it, possibly 12 " or more of snow. Seems like you get hit hard every year at this time.
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug |
|
#2
|
||||
|
||||
|
Our local weather forcaster says NE is in for it, possibly 12 " or more of snow. Seems like you get hit hard every year at this time.
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug |
|
#3
|
|||
|
|||
|
Almost hit 80 today here in Delaware. Did a little bit work today on th eV. yanked the battery cables off and replacing with new ones. Lifted the motor up with my pinched nerve in my neck. Yes I hurt myself doing it. :-[
Look at the trim pump. Cant figure how the pump comes off without pulling the motor. Only found one bolt to remove the trim motor. :'(
__________________
|
|
#4
|
|||
|
|||
|
Almost hit 80 today here in Delaware. Did a little bit work today on th eV. yanked the battery cables off and replacing with new ones. Lifted the motor up with my pinched nerve in my neck. Yes I hurt myself doing it. :-[
Look at the trim pump. Cant figure how the pump comes off without pulling the motor. Only found one bolt to remove the trim motor. :'(
__________________
|
|
#5
|
|||
|
|||
|
As a devoted member, I ran out and snapped a photo of my titlt trim motor.
Using the tilt trim swith on the controls, I hit up and down and both solinoids were clicking, making me believe that the solinoids are working....I guess. Anybody ever yank a trim motor, do you need to pull the motor ??
__________________
|
|
#6
|
|||
|
|||
|
As a devoted member, I ran out and snapped a photo of my titlt trim motor.
Using the tilt trim swith on the controls, I hit up and down and both solinoids were clicking, making me believe that the solinoids are working....I guess. Anybody ever yank a trim motor, do you need to pull the motor ??
__________________
|
|
#7
|
||||
|
||||
|
sorry to hear about the neck ... i feel ur pain , when i replaced the trim motor on my 140 it had 4 bolts and was ver simple but that was a johnson not a merc . call on Dr skools
__________________
1987 Dual Console / 2007 200 hp E-Tec |
|
#8
|
||||
|
||||
|
sorry to hear about the neck ... i feel ur pain , when i replaced the trim motor on my 140 it had 4 bolts and was ver simple but that was a johnson not a merc . call on Dr skools
__________________
1987 Dual Console / 2007 200 hp E-Tec |
|
#9
|
||||
|
||||
|
Yea two days ago it was in the 70's here. *This morning an inch of snow on the lawn. *MJ will be getting the same storm soon. *Billy Mac *;D
Never pulled the trim motor! http://intellicast.com/IcastPage/Loa...p;prodnav=none
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug |
|
#10
|
||||
|
||||
|
Yea two days ago it was in the 70's here. *This morning an inch of snow on the lawn. *MJ will be getting the same storm soon. *Billy Mac *;D
Never pulled the trim motor! http://intellicast.com/IcastPage/Loa...p;prodnav=none
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug |
![]() |
| Thread Tools | |
| Display Modes | |
|
|