Transoms outer skin has been removed

[reelapeelin]

Originally Posted by Stillrunning

Taking the boat apart is not really that hard of a job. I did a center consol that way and we had the boat ready to take apart in one day. We just labled and unhooked the wiring ,throttle, and stering cables. Removed the CC and loosened all gas lines and that type stuff. Unscrewed the two and made a hoist in a big tree limb and using a truck raised the inner linning and pushed the trailer out of the way and lowered back to the ground. Now you have total access to stringers, transom, and the wood on the underneth the flooring. I say we had apart in two days max. The time spent removing the two sections will be used fiberglassing and painting the outer skin. I did just about like cfelton did his from the inside.

After the motor's off, it's probably pretty easy ;) ...




...and I've got it on pretty good authority w/two trusted witnesses...choice of core material doesn't matter if the job's done properly...even if the new synthetic cores are used and not sealed right, they'll soak water like a sponge ;) ...