HULL REPAIR

[Skools Out]

The damage doesn't look bad. the long strip of gelcoat missing on the bottom needs to be sealed with resin once the hulls dry's out needs to sit inside if avail so it can dry. That long exposed strip of missing gelcoat will allow water to seap thru the hull. once it drys out then be resined and then get the bondo area a coat of glass and some resin then sand and paint the lower area with marine paint. looks good not a big issue no fear there Mike. yeah in the one of your pipe you need to raise the bow as high as it will go and run a wire up the tube to clean it out.