|
|
#3
11-03-2005, 09:44 PM
|
||||
|
||||
Re: First Splash
Thanks MJ, went out and measured, it appears I have a 25" shaft. I measured the keel line as best I can and it appears the ventilation plate is about 4" above that line. I went to the web and got mounting instructions for the Armstrong and they say you need to raise the motor approx 2.5" above that line for a 30" bracket. So I am at least 2" too high. I have one more hole on the motor I can go down, about 3/4 " maybe that will help. If not I might be able to drill new mounting holes from what I can see in the bracket and seal up the old ones. I have to do more checking because I have so much positive floatiation in that boat and I was flying solo today. Put a couple more guys and a cooler of ice and it may be a non issue
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode