Re: wont crank
What's the problem then? I've been crankin my 70hp Evinrude with a rope for 2 years now! Its great exersize! ;D
Just addin to Franco's post - two big wires on each side of solenoid. When standing on the port side looking at the solenoid, you can unhook the right hand wire (not the one going from solenoid to starter). It should be hot with the key switch on. So, you can take that wire and place it on the starter where the left side wire on the solenoid connects to the starter. It'll prolly be at the bottom. Count to three and touch it on there. It should fire up.
Oh yea, what kind of motor is it?
__________________
1994 Wellcraft V21
|
Hybrid Mode
