|
|
|
|
#1
|
||||
|
||||
Looking good.
|
|
#2
11-16-2019, 09:41 AM
|
|||
|
|||
|
Just more pics but it’s out of the garage.
__________________
 1986 V20 Cuddy in pieces  "WILD FINN"
|
|
#3
03-29-2020, 11:36 AM
|
|||
|
|||
|
It’s been too long for an update
Well I haven’t updated this for a long time but work hasn’t stopped. I spent the whole winter picking away at the bottom. It was crazy there had to be close to 1/8 inch plus of bottom paint!! I ended up flipping the boat and just sanding forever! Once I got it all off I spent a ton of time trying to fair what I could it’s not perfect at all, but it will pass the “good from a far but far from good” test.
I’ll add some pictures tonight of the progress. Hope all are health and safe!
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
|
#4
03-29-2020, 02:48 PM
|
|||
|
|||
|
These are from November, just never posted them.
Used my redneck gantry crane to flip it.
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
|
#5
03-29-2020, 02:50 PM
|
|||
|
|||
|
Admit it, who is this?
Once it was over I glassed the bottom of the bracket to the transom.
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
|
#6
03-29-2020, 02:57 PM
|
|||
|
|||
|
So after months of chipping away I was happy with the bottom. I rolled 4 coats of totalboat total protect high build epoxy barrier coat. Then it was time to spray the finish bottom paint on. I went with Interlux VC performance epoxy. Great stuff to work with, easy to use and came out looking good. I had a few spots I messed up on, but over all I’m really happy.
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
|
#7
03-30-2020, 10:14 AM
|
||||
|
||||
|
Thanks for the update. It's good to hear from you.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
