|
|
|
|
#1
|
|||
|
|||
Really the only thing to note on these ones is the stringer extension holes cut. This was challenging, trying to make the holes long up perfect with the internal stringers? Lots of pilot holes and still was like 3/4 inch off on on.
__________________
 1986 V20 Cuddy in pieces  "WILD FINN" Last edited by Slightly_Twisted; 11-16-2019 at 09:47 AM. 
|
|
#2
11-11-2019, 05:19 PM
|
|||
|
|||
|
Ok this is outcome after the mold came off.
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
|
#3
11-12-2019, 04:21 PM
|
|||
|
|||
|
Pictures of the stringer extensions from the hull to the bracket.
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
|
#4
11-13-2019, 07:56 AM
|
||||
|
||||
|
Looking good.
|
|
#5
11-16-2019, 09:41 AM
|
|||
|
|||
|
Just more pics but it’s out of the garage.
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
|
#6
03-29-2020, 11:36 AM
|
|||
|
|||
|
It’s been too long for an update
Well I haven’t updated this for a long time but work hasn’t stopped. I spent the whole winter picking away at the bottom. It was crazy there had to be close to 1/8 inch plus of bottom paint!! I ended up flipping the boat and just sanding forever! Once I got it all off I spent a ton of time trying to fair what I could it’s not perfect at all, but it will pass the “good from a far but far from good” test.
I’ll add some pictures tonight of the progress. Hope all are health and safe!
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
|
#7
03-29-2020, 02:48 PM
|
|||
|
|||
|
These are from November, just never posted them.
Used my redneck gantry crane to flip it.
__________________
1986 V20 Cuddy in pieces "WILD FINN"
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
