![]() |
|
|
|
#1
|
||||
|
||||
|
I have that engine - have you checked the screen in the carb where the fuel line attaches?
__________________
|
|
#2
|
|||
|
|||
|
Fuel Good - Filters Good - Pump Good, no junk in carb screen, vent good. I am now suspecting coil / dizzy and will be checking that today. I don't believe I am running a 3ohm coil. It is a flamethrower, but it was one I had kicking around from my 6-cyl mustang.
Of course it's impossible to run down to a store and find a pertronix 3ohm coil... |
|
#3
|
|||
|
|||
|
I was wrong above. FUEL PUMP BAD. Ran on a electric carter pump I had laying around. Perhaps this weak pump is why I was not seeing fuel transfer from idle to the venturis. MUCH better.
Sheesh. ALSO - Cleaned and lubed dizzy counter weights - that was an issue as well. Still need to get a 3ohm coil. Last edited by 1966Mustang; 09-07-2019 at 04:46 PM. Reason: correction |
|
#4
|
||||
|
||||
|
Glad you pinpointed it!
__________________
1987 V20 Center Console - Resto in progress |
|
#5
|
|||
|
|||
|
Took old fuel pump apart - top diaphragm cracked, bottom diaphragm not much better looking.
Sierra 18-35437 Fuel Pump is not the right replacement for this engine. Not sure if it purports to be, but the cross reference I found listed it as one... not. Wrong cam lever for one... Wrong port orientation for 2. My engine is A678730 - Listing Fuel Pump: 8M0073435 which is proper. This looks correct: https://boats.net/product/mercury/8M0073435 |
|
#6
|
|||
|
|||
|
I got the same motor, was thinking fuel pump too. Glad you figured it out. Check Ebasicpower, I've bought a lot of parts from them. They will get them to you quick!
__________________
77 V20 cuddy with 170 I/O Mercruiser 72 16ft. Carolina w/a 25hp Evinrude |
|
#7
|
|||
|
|||
|
Getting back to my fuel pump... AMK Products makes a complete carter rebuild kit that looks like the correct dimensions, but with an extra check valve for the mercruiser application. I've ordered a new OEM one, but I'm going to get one of these kits and try it on my old one.
https://www.deadnutson.com/carter-hi...p-rebuild-kit/ << the comments here talk about mercruisers... Great instructions -> https://www.428cobrajet.org/how-to-fuel-pump https://www.cjponyparts.com/67-and-u...-1967/p/AFP67/ |
|
#8
|
|||
|
|||
|
The AMK Kit Works - AFP-67 - Rebuilding the OEM part is a possibility. Everything fits, proper dimensions.
Last edited by 1966Mustang; 09-11-2019 at 11:43 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|