Horsepower over the years

[phatdaddy]

My dad had a gas station in town, we sold CarterCraft wooden skiffs without motors, you had to go down to Western Auto and buy your own motor, and mount it yourself. No big deal, you just tightened two clamps. We had a 15 ft with a 35 Evinrude with electric start.

I thought i was the coolest kid on the river

Later i got a 13 whaler and put a 50 Evinrude on it. Probably the reason i have back issues today

Now, i find myself being built more for comfort than for speed

[spareparts]

Scout is building a 53 center console, hull #1 went to Yamaha, had 5 425hp motors on it. Hull #2 went to Mercury, had 6 400hp motors on it. The next three hulls went to the middle east, all with 6/400 mercs. Twin 250's are common place, trips are getting more popular, quads and more are only for the big boys +40ft

[THEFERMANATOR]

I still think anything more than 3 outboards is just silly, and should bite the bullet and go with a pair of surface drives with diesels.

[SkunkBoat]

agree. 37 ft bow riders are silly too.

All about the roll up. 4 motors and 24 speakers.....motor to speaker ratio gets you laid I guess....

[bgreene]

My dad bought a 9.5hp Evinrude in 1972 because the row boat rental places we used didn't allow bigger.

We used it on wooden 16' boats, then when we used it on aluminum hulls we thought it was fast. Still have that outboard.

The 7 Marine 626hp now the biggest, but figure in less than 10 years a 1,000 hp outboard likely.

[cfelton]

You all are talking some crazy horsepower there! My Dad and I started with a 16 ft. juniper flat bottom boat with a 3hp Evinrude. I could paddle as fast as it ran. Got us to the fishing hole every time and used about a gallon of gas a year. Somebody gave me a 18hp Mercury, got it running and I thought it would fly. I have a 16ft Carolina plywood boat with a 25 Evinrude that will scoot along pretty good, can't wear a ball cap wide open! A friend of mine had a 18 ft fiberglass boat with a nasty built Mercury OB that ran 96 top end, Scared the crap out of me! I've watched the drag boat shows , that looks fun!

[spareparts]

Originally Posted by cfelton

You all are talking some crazy horsepower there! My Dad and I started with a 16 ft. juniper flat bottom boat with a 3hp Evinrude. I could paddle as fast as it ran. Got us to the fishing hole every time and used about a gallon of gas a year. Somebody gave me a 18hp Mercury, got it running and I thought it would fly. I have a 16ft Carolina plywood boat with a 25 Evinrude that will scoot along pretty good, can't wear a ball cap wide open! A friend of mine had a 18 ft fiberglass boat with a nasty built Mercury OB that ran 96 top end, Scared the crap out of me! I've watched the drag boat shows , that looks fun!

Friend of mine is the current Top Fuel Hydro points champ(Mike Robbins, Nitro Nuts Racing), he held the mph record till the last race when it was beat, I think its 268 mph. he still holds the ET record 3.8 seconds 875 feet. I've driven to 99 mph, rode shotgun to 106. Been 86 across the harbor(1.5 chop). Its addictive.