Has it ever been done?? Well it’s about to happen.

[3 Squids]

Yea I like a 200 on these hulls but a 150 does its job. For this project I have a 2004 Johnson 175 so I guess I’ll have the best of both worlds?? I bought a 20’ Palm Beach center console that needs a floor. It’s just been sittin because well, it’s really not my style of boat and I haven’t wanted to spend the time or money on it. But it was a deal I couldn’t pass up. I can easily part it out and get my money back but instead I am just going to part it out to myself for the V-21. I now have a console, T-top, leaning post, motor/rigging, fuel tank etc. The trailer it’s on is also nicer than the one the V is on so I’ll swap that out to.

8363111B-F124-4610-AE22-75965EE39830.jpg

If anyone local wants this Palm Beach hull when I’m done she’s free to a good home. Needs a floor and the PO cut some of the floor out and it’s been open in the rain so I’m sure the foam is logged.

[Destroyer]

Interesting. https://www.ebay.com/itm/1986-Wellcr...gAAOSwx95bFWi4

[3 Squids]

Originally Posted by Destroyer

Interesting. https://www.ebay.com/itm/1986-Wellcr...gAAOSwx95bFWi4

That an 18’ right?

[Destroyer]

Yes. Still... it's an interesting find for anyone looking for a smaller boat.

[1224bret]

I’m actually in the process of converting my cuddy to a cc and am doing it like you are glassing the floor directly to the sides setting on top of the stringers. Looking forward to your progress pics.

[1224bret]

Here’s a pic that kinda shows what I’m doing. Completely built console from scratch not quite finished with it yet.

[3 Squids]

Originally Posted by 1224bret

I’m actually in the process of converting my cuddy to a cc and am doing it like you are glassing the floor directly to the sides setting on top of the stringers. Looking forward to your progress pics.

Originally Posted by 1224bret

Here’s a pic that kinda shows what I’m doing. Completely built console from scratch not quite finished with it yet.

Very nice. I can’t wait to get mine started. Unfortunately work is keeping me away from it recently. I did manage to have 10 free minutes yesterday and I dug into some of the foam and just as I suspected the last inch or so was solid water. I had dental surgery yesterday and by doctors orders took today off so I plan on going out today and getting the foam all out and clean her up and get a cover on her.

[Destroyer]

Yep. That last 1-3 inches of foam is usually where the water is the most. It's amazing how much extra weight just those few inches can add to the total overall weight of the boat.

I'm in the process of removing the same thing (saturated foam) from my 16.5 Airslot. I've already removed over 350lb of saturated foam. I think I'm going to try something a little different this time. First, I'm going to use solid foam noodles (think of the ones used in swimming pools) instead of foaming in place to fill the voids.. This way I'll always be able to remove and replace them easily and cheaply if they get waterlogged. Second, instead of glassing the deck back into place like I did with my V21, I think I'm going to secure it back down with SS screws and seal the edges with silicone caulk so I'll always be able to remove it easily. The whole idea is to make it as easy as possible to remove the deck again if I ever have to replace the fuel tank or bilge pumps or filler hoses or.... well, you get the idea. I'm all about convenience on this project.