1996 Wellcraft V21 Suzuki 140 4 stroke clean cuddy Lots of Pictures

[SkunkBoat]

Originally Posted by shep65

Randleman that would be great ! I want to change props and getting to try one before I shell out a few hundred would ease my mind .

Thanks guys

great idea! 30mph is a perfect cruise speed for V20s. You want to do that at about 5k rpm and still have lots of room to push it on a flat calm day. The 14 x20 tops out on my boat just under 6k rpm. The SkunkBoat is Heavy due to hard top, fishing gear and full tank.

[randlemanboater]

We were able to get Dave's 18 foot Nitro bass boat to 47 mph gps at 6200 rpm, but we couldn't go WOT without overreving, so he needs more pitch.

Shep, I sent you a pm.

[randlemanboater]

Prop's in the mail.

[shep65]

got it ! you are the man ..I want to try it out this week ..If I can skip out of work early one day i'll report back with #s . If not this weekend

Thank you !

[randlemanboater]

Good deal. I really think that you are in for a treat, it will be like getting a new boat.

[shep65]

ok so I made it out yesterday and hit 5400 rpm and 32 mph with the throttle hammered . I thought about it last night and this morning I adjusted the throttle cable at the motor. I couldn't adjust it too much without getting the idle turned up to high but did manage to get 5600 to 5700 rpms and 35mph . I was expecting a little more but didn't have anymore throttle to give it .. Could my cable be worn out ? It seems like I could get more RPM if I had more throttle. Or am I expecting too much out of the motor ? Again im ok with 30 mph. I don't need anymore speed ,at this point im just messing around .

Randleman , How much you want for the prop ? Or would you rather I send back ? You can PM me we don't have to negotiate in public .

Thank you for letting me use it !

[randlemanboater]

I was expecting you to be able to hit 6200 rpm and close to 40 mph. Could be something is going on with the cable itself or the adjustment. Or maybe your boat is that much heavier than mine or your motor is mounted lower than needed...there are many factors.

I will PM you about the prop price.