Oil injection

[Destroyer]

Originally Posted by steplift20

Destroyer, I'm not very mechanical And for some reason I have a hard time disconnecting and altering things on my outboard , I don't know why I did do some work lower unit oil , putting in some parts on the engine , do you think it's hard to follow his instructions for bypassing the oil system ? I hope I can do it cause that's a problem I'm having with the motor , It's loading up with oil sometimes making it hard to start so if I remove that system Then Problem solved I will wait for your response Thanks destroyer

I PM'ed you the instructions. print them out. Take off the cowl of your engine and follow them without taking anything off. Once you have it all down then do it. It's really not hard.

PS It really help if you have a shop manual with schematics and blueprints so you know where the various parts on your engine are. They are amazingly simple machines. As long as you don't have to tear apart an engine block everything else is pretty much right out in the open.

[steplift20]

I just read your instructions and it doesn't seem hard, I think I will go for it, thanks destroyer, I will let you know how it turns out A big thanks to you

[Destroyer]

Originally Posted by steplift20

I just read your instructions and it doesn't seem hard, I think I will go for it, thanks destroyer, I will let you know how it turns out A big thanks to you

I'm just the messenger. SpareParts deserves all the credit. He sent me those instructions over 5 years ago (02/01/12).

[steplift20]

A messenger is just as important as from where the source came from Thanks