|
|
|
|
#1
|
|||
|
|||
So update 17 or whatever we're on now. After some tinkering around and adding more fluid I finally got things working. Mostly. The motor will trim all the way down but not all the way up. My boat has two trim rods and the main cylinder that is connected to the motor. It will only go as far up as the two trim rods will lift it. After that, nothing. I can manually lift the motor all the way, which is quite heavy, so I know that cylinder is not stuck. Thoughts?
|
|
#3
07-09-2017, 10:49 PM
|
||||
|
||||
|
Sounds like you have air trapped in your lines.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
