![]() |
|
|
|
#1
|
||||
|
||||
|
Pretty sure YAMAHA only gives you the ID tag. If you post pics and start looking at part numbers for things, you might be able to figure out pretty close to what year it is. The other problem many run into is it's a 20 year old outboard. Many engines of that age have had problems by now, and had parts swapped out. Many of these parts are expensive, so quite a few will swap in different parts that work, but may not be 100% correct, so you can get some real basket cases of parts with some of them. So unless you know the history on the engine since new, be prepared to use the year and such as a guide more so than anything else. It SHOULD fit, but it's no guarantee.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#2
|
|||
|
|||
|
Ferm ,thanks for the info, as I have to assume the p/o having owned the boat for 12 years is correct on what year motor he had .I just want conformation on the model as well.when I look up parts I see their are 4 different model numbers. For the 1997 Yamaha v250 fuel injected ox66salt water series , I actually looked up the vst fuel filter for all 4 of those model numbers and each model used the same filter and thermostats! I don't know how that works as Far as electrical parts and that concerns me obviously. And I did take a few pics of the motor which I will post soon as I can
__________________
1988 Grady White Seafarer Yamaha 250 ox66 on a bracket |
|
#3
|
|||
|
|||
|
See attached pics
__________________
1988 Grady White Seafarer Yamaha 250 ox66 on a bracket |
![]() |
| Thread Tools | |
| Display Modes | |
|
|