Can you see through your clear vinyl?

[Destroyer]

Not long ago Barry (Inaforty) gave me an enclosure that he had lying around. Before he sent it to me he replaced the front panel just like he's talking about here. I can and will attest to the fact that his work is first class. In fact it's better than most shops I've dealt with in the past. Perfect, tight stitching. The quality of his work is self evident. If you need new panels and want people to say he is the man. Period!!

[inaforty]

Destroyer,
Thanks for the kind words and endorsement.
Hope you can get the enclosure to fit.

[phatdaddy]

Inaforty, let me do some measuring on mine, but it sounds like a plan

[inaforty]

Phat,
Sounds good.
I knocked out a windscreen for a 30' Scarab on Monday.
Wish I would have taken a photo of the old Strataglass.
Nice and clear!

[phatdaddy]

Wow, by redoing my vinyl, it'll turn into a 30 scarab, i'm in!!!

Back to reality, i'll get the measurements tomorrow. If i make some paper patterns, could you make me some "wing walls".

[Striper80]

I don't have a v20 but can't see through my windshield. Would the plastic be able to make the turn like my cheap factory plastic.

[inaforty]

Phat,
I can make the side panels for you but attaching them to the top and front panel is were it gets tricky.
If you lay out your pattern you have to take into consideration how and were it's going attach at the top and bottom and to the front. So if you need zippers installed you have to mark where they go and the beginning and end of each zipper also which end is the starting point and also what half of the zipper installed (the part with the slider or the part with the post).
Most side panels attach to the top with a zipper and side to front panels are zippers also.

If you have the old side panels that would make positioning all the attachment points much easier.