![]() |
|
|
|
#1
|
||||
|
||||
|
Looks, I like more of an old school setup as well.
I'll take Marilyn Monroe over Miley Cyrus.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20 |
|
#2
|
|||
|
|||
|
thanks
|
|
#3
|
||||
|
||||
|
Quote:
Yup... or Sophia Loren over pretty much anyone else....
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) ![]() Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. |
|
#4
|
||||
|
||||
|
Quote:
But I'm with you on dual console layouts...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#5
|
|||
|
|||
|
Dual console is the way to go. Plenty of space for fishing and a lot of storage. Its gotta be the best boat ever made! but I don't know anything about the 210.
|
|
#6
|
||||
|
||||
|
The 99 210 is a eurotransom, so you lose over 2 feet of deck space right there. The v20 isa 20 degree hull with alot of bow flare and sharp entry to slice waves. The 210 is a modern low dead rise design meant to ride over the waves instead of through. The 210 will be a much shallower draft hull compared to the v20, and I imagine would do better with lower hp. Its pretty much an apples vs oranges comparison.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#7
|
|||
|
|||
|
Thats the info i wanted to hear. Thanks
|
|
#8
|
||||
|
||||
|
I've never been on a 210 myself, but I know the ride on other modern Wellcraft hulls was surprisingly good. Just from looking at pictures though, the 210 looks to give up alot of deck space compared to a v20. The v20 cuddy cabin has a dance floor for a cockpit, and the dual console model isn't to shabby either(but the dually has those HUGE bow seats and room to fish off the bow). I can't say the same for the 210 from the pics I seen of it, and the euro transom layout looks nice for a weekend boat for getting in and out for swimming, but if you were to fish it would be ALOT of dead space. Now I went and looked at some pictures of the newer 210 sportsman, and it looks like a MUCH nicer layout with alot more useable area. So you may want to look into one of the newer hulls.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#9
|
|||
|
|||
|
what everyone else said ispretty spot on. as far as layout goes, think about how you are gonna use the boat cause there is a huge difference between the two. as far as the ride comparrison, i can shed some light cause ive spent time on both. without question the 210 is a better ride at speed in calmer and rolling seas. it is just a better balanced boat and feels wider. a v20 feels skinnier and feels light in the nose. even though it has a sharper entry waves seem to bounce the nose up more in lesser seas. the 20 bounces more but has a VERY smooth re entry. and the way that works also means that in snotty conditions the 20 is the much better ride. the 20 is much drier but the 210 doesnt rock as much side to side. add trim tabs to the 20 and might as well say that we have a third boat to discuss that is far superior to both the others in all conditions
|
|
#10
|
|||
|
|||
|
How do you plan to use the boat ?
If includes open bay & ocean I strongly recommend trim tabs. These V's will pound in a chop.......but the tabs will reduce that tremendously by keeping the cutting edge of the hull down into the waves. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|