3Squids '79 Center Console thread

[3 Squids]

Well it's been pretty humid so my glass guy is having alot of trouble getting my top as well as everything else he's working on done. I brought the boat home today and am going to yank the Merc off. Powerheads headed to get rebuilt and I'm going to go ahead and get the transom replaced. So when I get everything back and put together she'll be ready to slay some Stripers this fall.

[3 Squids]

Got some work done today. Boats back at the fiberglass man. Thinks maybe Wed he will start cutting into the transom. There is definitely moisture in there. I stuck a screwdriver into the lower bolt holes and could dig wet wood out pretty easily. It's a shame because according to the PO it was only done 2 years ago by a reputable Marina, but guess stuff happens. I don't think the rot will be spread far but I figure I might as well nip it in the bud now while I'm waiting to get the motor rebuilt.

And we have detachment.


I figured I'd find all sorts of goodies when I pulled the aluminum plate off but it all looked pretty solid.


Motor hanging around. Tomorrow I'll have to snap a pic of my $20 engine stand I built. Probably the most over engineered stand built to date (by the way I'm not an engineer), but she definitely handle the monster well.

[3 Squids]

Did some rearranging in my Photo Bucket which apparently changed the URL so all my pics are down. I'll get it back up soon. But anyways here's my $20 stand. Unbelievably sturdy.

[Destroyer]

Great engine. Nice stand. Well done. :)

[3 Squids]

I can't wait to get this thing back together. It screamed with a hurt motor, I only can imagine what she'll do hitting on all 6. Got the powerhead off tonight. Hopefully that'll head to get rebuilt tomorrow. Taking some cash to the glass man tomorrow to get him going. Seems to be all coming together. Knock on wood.

[3 Squids]

Not much of an update. Motors at the motor man. Boats still at the glass man. He cut the skin off the transom last night and on the starboard side he started at the top and when he got to the chine water began to run out. Made it sound like a substantial amount. He then went along the bottom of the hull cutting and said water just kept coming out. He hasn't got the skin free of the wood yet but he pulled the top away and the wood is definitely shot. It's delaminating like crazy and is flaky.

Supposed to get the skin off tonight and try and figure where all the water is from. He cut the port side all the way down to the plug first, and not a drop of water came out. Seems something made a sort of pocket in the starboard side that it collected in. Just praying when he gets it out that the stringers and foam are ok.

[Destroyer]

Originally Posted by 3 Squids

Not much of an update. Motors at the motor man. Boats still at the glass man. He cut the skin off the transom last night and on the starboard side he started at the top and when he got to the chine water began to run out. Made it sound like a substantial amount. He then went along the bottom of the hull cutting and said water just kept coming out. He hasn't got the skin free of the wood yet but he pulled the top away and the wood is definitely shot. It's delaminating like crazy and is flaky.

Supposed to get the skin off tonight and try and figure where all the water is from. He cut the port side all the way down to the plug first, and not a drop of water came out. Seems something made a sort of pocket in the starboard side that it collected in. Just praying when he gets it out that the stringers and foam are ok.

Ummmm ... What is he cutting? The inside or the outside skin? The transom has a curve to it.. slight, but it's there. That's why most that cut the skin cut the inside one to maintain the curve.