a pictures worth a thousand words

[smokeonthewater]

The middle ones are where all of the positive accys should be connected... Pos from the battery should be on the other side of the fuses from them and the last strip is for all negative wires.

[Troutkiller2006]

WOW!!! you guys know a lot about boat wirirng!!!!

so yall will be here right after work tomorrow to help me rewire this thing, right?

[smokeonthewater]

I have an air conditioned shop.... You come to me n bring pizza.

[Troutkiller2006]

that sounds like such a good idea smoke. too tired to cook, think ill order a pizza. meat lovers or bbq??? hmm, maybe just plain cheese

[smokeonthewater]

Peperoni n xtra cheese

[steplift20]

Sorry guy but that doesn't make spence
You can't put the positive from the battery on all the left side screws
Only one on the top and the ones under on the same side are for the accessories the middle ones are still empty the left is the ground, I would really like to see a pic of one hooked up correct

[SkunkBoat]

I don't know why you keep saying left and right...the picture I see has "top, middle, and bottom"....

The long silver bar on top is the negative bus. You connect the neg battery and all neg (should be black) accessory wires. [ in the picture, they have incorrectly connect +12v to this bus bar]

The long silver bar on the bottom is the positive bus. You connect the +12v feed from the battery (usually RED). IT SHOULD BE FUSED AT THE BATTERY. And I think in this picture the wire is not heavy enough to feed an accessory bus. That depends on what is connected and how far it is from the battery.[ in the picture, they have incorrectly connect negative battery to this bus bar]

The LOADS in this picture are the orange wires. They should be connected to the middle screws. In that way, they will each get power thru their own fuse.

In this picture, none of the loads are fused. They are connected directly to +12v. The fuses in this picture are not being used at all.
Because they have the +12 and neg bus bars reversed, the fuses will never have power because they are connected to a Negative bus.
It cannot be more wrong.

[smokeonthewater]

Originally Posted by steplift20

Sorry guy but that doesn't make spence
You can't put the positive from the battery on all the left side screws
Only one on the top and the ones under on the same side are for the accessories the middle ones are still empty the left is the ground, I would really like to see a pic of one hooked up correct

I'm 'fraid it's you that isn't making sense...

Look at the pic with labels that skunkboat posted... If it still doesn't make sense to you then I'm sorry to say but you need to let someone else take care of your electrical system for you..... Not trying to be mean AT ALL..... just honest.